Cylinder Mower Sharpening in Bellevue, WA 6056
Cylinder Mower Sharpening Bellevue
If your cylinder mower (or reel mower, same thing) is tearing the grass instead of cutting it, we'll sort it. Specialist cylinder mower sharpening trusted by Perth families and tradies since 1975. Servicing Bellevue and the wider Hills region.
How it works
Book it in
Online booking takes a minute, or call us if you'd rather chat about it first.
We collect it
We pick up from your address at a time that suits. Just leave it accessible.
Specialist sharpening
Cylinder ground on specialist machinery, set with feeler gauges, engine serviced.
Returned to you
Quality checked before it goes back on the truck. Delivered to your door.
What's actually in the service
A proper cylinder mower service isn't a quick once-over with a grinder. The cylinder comes off the mower, gets sharpened on specialist cylinder grinding machinery, then it goes back on and the gap to the bottom blade is set with feeler gauges. The result is the clean scissor cut a cylinder mower is meant to give you.
Here's everything that's included:
Specialist cylinder grinding
Each spiral blade ground evenly on dedicated cylinder machinery. The kind of finish a hand file can't match.
Cylinder setting
Feeler gauges, fraction-of-a-millimetre adjustments, until the cylinder just kisses the bottom blade along its full length.
Bottom blade check
If it's worn out we'll tell you, and quote a replacement before we proceed. We stock the common ones.
Full engine service
Oil, plug, air filter, fuel system clean. The engine bit that everyone forgets about. Included.
Adjustment & lubrication
Cables, throttle, drive systems checked and lubricated. The little things that make a mower feel like new.
Quality check before return
Inspection before it goes back on the truck. We make sure the work meets our standards before delivery.
Cylinder mowers in Bellevue
Bellevue is a residential suburb at the foot of the hills, around 21 kilometres east of Perth's CBD. Mix of established homes and family neighbourhoods.
Established homes in Bellevue often have lawns that benefit from regular cylinder service.
Why Bellevue chooses Sandersons
Cylinder mower specialists
Most general mower workshops don't have anyone who knows cylinders properly. We've been doing them for 50 years.
Proper cylinder machinery
Specialist cylinder grinding equipment, not just a bench grinder and a file. Even, accurate, repeatable.
Flat rate, no add-ons
Flat rate for the general service, pickup and delivery included. If something else is needed (like a new bottom blade) we'll call you and quote it before we touch it.
We come to you
Pickup and delivery across Bellevue and the Hills region. No need to load a heavy machine into your car.
50+ years in
Family owned since 1975. We know cylinder mowers.
30 day workmanship guarantee
If something we serviced isn't right within 30 days, we'll fix it again at no charge.
Common questions from Bellevue customers
Do you service cylinder mowers in Bellevue?
Yes. Bellevue is well within our service area along with the rest of the Hills region. Book online or call us on (08) 9444 1284 and we'll arrange pickup.
Is a reel mower the same thing as a cylinder mower?
Yep. Reel mower is the American name, cylinder mower is what we tend to call them in Australia. Same machine. Same service. So if you've been searching for "reel mower repair near me" or "reel mower sharpening", you're in the right place.
Do you sharpen cylinders by hand or with a machine?
Specialist cylinder grinding machinery. A bench grinder or hand file can't get a long cylinder evenly sharp along its full length, and any unevenness shows up as patches in your cut. Proper cylinder machinery does.
How much will it cost?
Give us a call on (08) 9444 1284 for a quote. We charge a flat rate for the general service, which covers pickup, delivery, sharpening, setting and a complete engine service.
If we find something extra wrong (bottom blade worn out, drive belt gone, that kind of thing) we'll ring you with a quote before we do anything. You decide whether to proceed.
How often should I get it sharpened?
Once a year for most home cylinder mowers. Late winter is the best time, so it's ready when spring growth kicks in.
Bowling clubs and sporting greens usually need cylinder service two to four times a year depending on how hard they're being used.
What brands do you service?
All the common ones: Bushranger (the 410CM is everywhere in Perth), Scott Bonnar, Mountfield, Masport, Atco, Greenfield. Vintage cylinder mowers too. If you're not sure, give us a call on (08) 9444 1284 and we'll tell you whether we can help.
How do I book?
Two ways:
Book online (takes about a minute)
Call us on (08) 9444 1284
Nearby suburbs we cover
We service cylinder mowers across the hills region. If you're in one of these suburbs, we've got a dedicated page for you too:
Mundaring
Hills town. Same flat rate.
Glen Forrest
Hills bushland. Same service.
Darlington
Premium hills heritage. Same service.
Boya
Small hills suburb. Same service.
Greenmount
Foot of the hills. Same service.
Helena Valley
Foot of hills, family. Same service.
Midland
Major regional centre. Same service.
Midvale
Established mature suburb. Same service.
Stoneville
Hills acreage. Same service.
Ready to book?
Pickup from Bellevue, full specialist cylinder mower sharpening, returned to your door. Book online below or give us a ring.
Book Online Call (08) 9444 1284