Pressure Cleaner Repairs in Madeley, WA 6065
Pressure Cleaner Repairs in Madeley
Pressure cleaner pulsing, leaking, dropping pressure, or just won't build at all? We'll sort it. Pickup and delivery available across Madeley.
Book Online Call (08) 9444 1284How it works
If you're a tradie or running a business, the last thing you need is to spend half a day chasing down a workshop. We come to Madeley, take it back to the bench, fix it properly, and bring it home.
Book online
Pick a slot through our online booking. Takes about a minute.
We collect
We swing past your place or worksite in Madeley and pick it up.
Bench service
Strip, diagnose, repair and pressure-test on the workshop bench. No guesswork.
Back to you
Delivered back to your door, ready to hit the next job at full pressure.
What a pressure cleaner service actually involves
Pressure cleaners cop a hammering. Pumps, hoses, fittings, engines, motors, all working under high pressure for hours at a time. Most jobs that come in are one of these:
Pump service & repair
The pump is the heart of the unit. We strip it, check for wear, replace what needs replacing, and pressure test before it leaves the bench.
Loss of pressure
If your cleaner is pulsing, surging, or just not building pressure like it used to, we'll find the cause and sort it.
Leaks & drips
Water leaking from the pump, the gun, the hose connections, or the lance. Usually a worn seal or fitting. Quick fix once we've got it on the bench.
Routine servicing
Pressure cleaners need regular maintenance to keep running properly. Most people skip it. We'll bring yours back up to spec.
Hose, lance & gun repair
The bits you handle take the most punishment. Leaking guns, damaged lances, split hoses. Genuine replacements where needed.
Engine & motor service
Petrol engine won't start? Electric motor cutting out? We service the engine end, not just the pump.
A note for Madeley pressure cleaner owners
Madeley is a mix of established residential, beachfront blocks, and trades running out of home workshops. Plenty of cleaners and detailers along the coast, plus the usual run of homeowners with their once-a-month patio blast.
Salt air is the recurring issue down here. The brass fittings on most pressure cleaners corrode from the outside in if you don't rinse the unit with fresh water after a coastal job. We see Madeley pumps with seized swivel fittings and locked-up trigger guns more than anywhere else in the south.
Brands we service
Karcher · Gerni · Stihl · Bar · Honda · Generac · Bosch · Ryobi · AR Blue Clean
If it's a pressure cleaner and it's broken, we can have a look. Petrol or electric, residential or commercial, doesn't matter where you bought it.
Can I use hot water in a cold-water pressure cleaner
Almost universally no. Hot water in a cold-water unit damages seals, causes warranty void, and creates safety risks.
Cold-water pressure cleaners are designed for water at typical mains supply temperature (10 to 25C).
What hot water does to a cold-water unit:
Damages seals (seals expand and lose effectiveness).
Damages plastic components.
Voids warranty automatically.
Creates risk of pump rupture.
If you need hot water for cleaning, you need a dedicated hot-water pressure cleaner. These are 3 to 5 times more expensive than cold-water units.
Or, alternative approach: use cold water with appropriate cleaning chemistry. Modern detergents are designed to work with cold water for most cleaning tasks.
Don't try to retrofit hot water capability to a cold unit. The seals, motor, and pump aren't rated for it.
Why Sandersons
50 years in
Family-owned outdoor power equipment specialists since 1975. Same family, same workshop ethic.
Honest quoting
We diagnose first, then ring you with the cost before any work goes ahead. No surprises on the invoice.
Pickup & delivery
Pickup and delivery available across Perth. Critical when your gear is your livelihood.
30-day workmanship guarantee
If something we serviced isn't right, bring it back. We'll fix it.
Common questions
Do you pick up from Madeley?
Yep. Pickup and delivery available across Madeley. We've been running services through this part of Perth for years.
How much does a pressure cleaner repair cost?
Depends on what's wrong and what brand you've got. Once we've stripped it on the bench, we ring you with a fixed price before doing any work. No hourly charging, no surprises.
My pressure cleaner won't build pressure. Worth fixing?
Almost always yes. Most "no pressure" jobs are unloader valves, worn pump seals, or blocked nozzles. None of those are expensive fixes on a decent unit. We'll have a look and tell you straight if it's not worth it.
How often should I service my pressure cleaner?
Annual oil change at minimum on the pump end. Tradies running them daily should service the pump every 6 months. Most homeowners never service theirs, which is why pumps fail at 5 years instead of 15.
Do you service electric pressure cleaners and commercial units?
Both. Karcher K-series and Bosch electrics, all the way up to Gerni and Stihl commercial petrol units. The pump end is similar across most of them, just different sizes and pressures.
How long does a repair take?
Usually back to you within a week. If parts have to come in (some of the European brands), we'll let you know.
How do I book?
Easiest is the online booking on this page. Pick a slot, leave your address, done. Or ring us on (08) 9444 1284.
We also service pressure cleaners in nearby suburbs: Rockingham · Safety Bay · Waikiki · Port Kennedy · Shoalwater
Pressure cleaner needs sorting?
Book a pickup from Madeley. Back to your door once we've sorted it, ready to work.
Book Online